150 mm (6") Borewell Submersible Pumpsets,Coimbatore, Tamilnadu, India,Hebron coimbatore

100 mm

FEATURES

    Single Phase motor is fitted with motor protector
    SS 304 grade stainless steel stage casings and impellers in radial flow pumps.
    50 Feet head per stage in specific models.
    Silver brazed rotor.
    Dynamically balanced rotating parts.
    Designed for extensive voltage fluctuations.

DESCRIPTION:
C.R.I. 150 mm (6”) Borewell Submersible pumpsets are built with different materials of construction together with extremely hardwearing bushes which makes this pumpsets highly durable. Radial flow submersible pumpsets are supplied with stainless steel impellers and stage casings and mixed flow pumpsets are supplied with LTB-2 and casted steel impellers to give better performance and longer life. The optimal design of impellers and diffusers offers best possible hydraulic efficiency. These pumpsets are powered by a water filled, rewindable submersible motor suitable for continuous duty.

SPECIFICATIONS
Power range	1.1kW – 26 kW (1.5HP – 35HP)
Speed	2900 RPM
Version	200 – 240V, Single Phase, 380 – 415V, Three Phase, 50 Hz, A.C. Supply
Maximum total head	503 m
Maximum flow rate	22.2 lps (80 m /h)
Nominal outlet size in inches	50, 65, 80 & 100
Degree of Protection	IP 58.
Maximum outer diameter in mm	143 & 145
Direction of Rotation	Clockwise from driving end.
Thrust Load	1500 lbs. 1.1kW to 4.5kW, 3500 lbs. 5.5 kW to 15kW, 6000 lbs.18kW to 26 kW
Minimum cooling flow along the motor	0.15 m/sec
Type of duty	S1 (Continuous)
Method of starting	Single Phase, Capacitor Start and Capacitor run (CSCR), Three Phase, DOL upto 5.5 kW, SD upto 26 kW.
Maximum starts per hour	12 times

SPECIFICATIONS
Power range	0.37kW – 5.5 kW (0.5HP – 7.5HP)
Speed	2880 rpm
Version	Single Phase, 200 – 240V, Three Phase, 380 – 415V, 50 Hz, A.C. Supply
Maximum total head	395 metre (39.5 bar)
Maximum flow rate	18000 LPH (18 M3 / Hr)
Maximum outer diameter in mm	97 & 98.
Nominal outlet size in inches	1 ¼, 1 ½, 2 & 2 ½
Degree of Protection	IP 58.
Direction of Rotation	Clockwise from driving end.
Thrust Load	1500 lbs.
Minimum cooling flow along the motor	0.15 m/sec
Type of duty	S1 (Continuous)
Method of starting	Direct on Line, Capacitor Start Capacitor Run (CSCR) / Permanent split Capacitor (CSR)
Maximum starts per hour	12 times.
Mounting Standard	As per NEMA

Fitted with imported motor protector in single phase motors
Silver brazed rotor
29 Feet head per stage in specific models
High operating efficiency
Extremely hardwearing water lubricated thrust bearings
Designed for extensive voltage fluctuations
Can be easily dismantled and repaired

MATERIAL OF CONSTRUCTION OF PUMP
Part Name	Material
Check Valve housing	CI / S.S 304
Check Valve Seat	Nitrile Butyle Rubber
Diffuser Chamber	SS 304 & Cast Iron
Impeller	SS, LTB 2 & Casted SS
Suction Inter Connector	CI, SS 304
Inlet screen	SS 202
Pump shaft	SS 410 / 431
Cable guard	SS 202
Coupling	SS 410

MATERIAL OF CONSTRUCITON OF MOTOR
Part Name	Material
Upper and Lower Housing	Cast Iron
Stator Shell	SS304
Shaft	SS 410 & EN 9 with 410
Journal Bushes	Leaded Bronze / Graphite Carbon
Thrust Assembly	SS 420 and Graphite Carbon

150 mm (6") Borewell Submersible Pumpsets

Hebron pumps list

Request a Free Quote

CONNECT WITH US